Protecting images – Olympus E-P1 User Manual

Page 91

aybac

k f
u

nc
tions

Use

k to select a frame and press the i button.

• Repeatedly select images only for the number of frames

selected in Step 2.

• To cancel your selection, press the

i button again.

Use

hi to select an image, then use fg to

select the gain for each image. Press the

button.

• Select from 0.1 to 2.0.
• The displayed image changes as the gain is adjusted.

Use

fg to select [YES], then press the i

button.

To overlay 4 or more frames:

j To overlay 4 or more frames, save the overlay image as a RAW file and use [IMAGE OVERLAY]

repeatedly.

Notes

• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
• When selecting a frame to overlay, the JPEG images for images recorded in JPEG+RAW are

displayed.

Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.

Single-frame protect

Play back the image you want to protect and press the

button.
•

9 (protect mark) is displayed on the top right corner of the

screen.

To cancel the protection
Display the images that are protected and press the

button.

TIPS

Protecting images

IMAGE OVERLAY

RAW

BACK

SET

x0.3

x0.1

x0.3

IMAGE OVERLAY

BACK

SET

i button

0 button

s0019_e_00_0_unified.book Page 91 Friday, April 24, 2009 9:21 AM