Olympus E-P1 User Manual

Page 59

Fo
cu

ng and

shootin

g function

Selecting the AF target mode and position

Select the AF target mode or select the AF target to use with Single target AF mode.

Using [AF AREA] select M to enable selection of the AF target mode and
position.

Use the main dial and sub dial or arrow pad to
select the AF target.

Selecting the position of the AF target with the
arrow pad.

j Press the shutter button halfway and release it, then use

the arrow pad to change the position of the AF target.

g“n FUNCTION” (P. 102)

Registering an AF target mode

You can register a frequently used AF target mode and the position of that AF target. You can
then quickly load that registered setting (“home position”) and use it when shooting.

Registering

In the screen of Step 2 of “Selecting the AF
target mode and position” (

gP. 59), press

the

< button and F button at the same time.

• The home position is registered at the time the

buttons are pressed.

• The home position cannot be registered when

operated from a menu.

Shooting

To use this function, you must assign the [

PHOME] function to the < button in advance.

g“; FUNCTION” (P. 100)

Press the

< button.

• The registered home position is selected. Press this button again to switch to the original AF

target mode.

TIPS

Set to B.

250

250 F5.6

F5.6

Indicates that the AF target is
being registered.

s0019_e_00_0_unified.book Page 59 Friday, April 24, 2009 9:21 AM