Olympus E-P1 - Manual (Page 42)

42
EN
1
U
sing li
ve vi
ew
You can check the effect of exposure compensation or white balance on a 4-split screen.
1
Press the INFO button repeatedly to display the
multi view display.
g“Switching the information display” (P. 41)
• The exposure compensation comparison screen is
displayed. Press f to switch to the white balance
comparison screen. Press fg to switch the screen.
2
Use hi or the dial to select the setting value, then
press the i button.
• You can take the picture using the set value.
x
Notes
• Exposure compensation is not available in M mode.
• This function cannot be used in A,
ART or SCN modes.
It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.
1
Press the INFO button repeatedly to display the zoom display.
g“Switching the information display” (P. 41)
• The enlargement frame will be displayed.
2
Use k to move the frame and press the i button.
• The area inside the frame is enlarged and displayed.
• Press and hold the
i button to return the enlargement frame to the center after it was
moved.
3
Turn the sub dial to change the magnification (7Ч/10Ч).
• Use k to scroll the frame even during magnification.
• Pressing the i button will cancel the zoom display.
Taking a picture while comparing the effect
Enlarged display operation
SET WB/ F
+0.3 +0.3 +0.7 +0.7
- 0.3 - 0.3 0.0 0.0
250 250 250 F5.6 F5.6
38 38
P
L N N
10x 10x
i button
s0019_e_00_0_unified.book Page 42 Friday, April 24, 2009 9:21 AM