Olympus STYLUS 1 - Manual (Page 90)

90 EN
Using separately sold accessories
11
11
Using separately sold accessories
Eyecup
You can exchange this for a larger eyecup
(EP-11). Removing
Using external flash units designated for use with
this camera
With this camera, you can use one of the separately sold external flash units to achieve
a flash suited to your needs. The external flashes communicate with the camera,
allowing you to control the camera’s flash modes with various available flash control
modes, such as TTL-AUTO.
An external flash unit specified for use with this camera can be mounted on the camera
by attaching it to the camera’s hot shoe. You can also attach the flash to the flash
bracket on the camera using the bracket cable (optional). Refer to the documentation
provided with the external flash units as well.
Functions available with external flash units
Optional flash Flash control mode GN (Guide number) (ISO100)
FL-14
TTL-AUTO, AUTO, MANUAL
GN14 (28 mm*)
FL-36R GN36 (85 mm*) GN20 (24 mm*)
FL-50R GN50 (85 mm*) GN28 (24 mm*)
FL-300R GN20 (28 mm*)
FL-600R GN36 (85 mm*) GN20 (24 mm*)
* The focal length of the lens that can be used (Calculated based on 35 mm film camera).
Wireless remote control flash photography
External flash units that are designated for use with this camera and have a remote
control mode can be used for wireless flash photography. The camera can control the
flash units in up to three separate groups. See the instruction manuals provided with
the external flash units for details.
1
Set the remote flash units to RC mode and place them as desired.
• Turn each flash unit on, press the MODE button, and select RC mode.
• Select a channel and group for each flash unit.
2
Select [On] for [ # RC Mode] in J Shooting menu 2 (P. 46).
• The super control panel switches to RC mode.
• You can choose a super control panel display by repeatedly pressing the
INFO
button.
• Select a flash mode (note that red-eye reduction is not available in RC mode).