Olympus STYLUS 1 - Manual (Page 51)

51 EN
Shooting using various functions
4
Bracketing (Varying settings over a series of photographs)
“Bracketing” refers to the act of varying settings automatically over a series of shots or
a series of images to “bracket” the current value.
In the shooting menu, settings for bracketing are available. Bracketing is available only
when [BKT] is selected.
1
Select [Bracketing] in J Shooting Menu 2 and
press
Q.
2
1
c
Shooting Menu 2
Back Set
Off
# Sync 1
Bracketing
# Sync
j/ Y o
# RC Mode
Off 1
Off
Off Image Stabilizer
2
Choose a bracketing type.
• You can select only one bracketing type.
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
3f 1.0EV
A-- G--
Bracketing
Back Set
AE BKT (AE bracketing)
The camera varies the exposure of each shot. The modification amount can be selected from
0.3 EV, 0.7 EV, or 1.0 EV. The camera continues to take shots in the following order while
the shutter button is pressed all the way down: no modification, negative, positive. Number of
shots: 2 or 3
• The camera brackets the value currently selected for
exposure compensation.
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
--
2f 0.7EV
2f 0.3EV
2f 1.0EV
3f 0.3EV
3f 0.7EV
3f 1.0EV
Off
Bracketing
Back Set
WB BKT (WB bracketing)
Three images with different white balances (adjusted in specified color directions) are
automatically created from one shot, starting with the value currently selected for white
balance. WB bracketing is available in P, A, S and M modes.
• White balance can be varied by 2, 4, or 6 steps on each of
the A – B (Amber – Blue) and G – M (Green – Magenta) axes.
• The camera brackets the value currently selected for white
balance compensation.
• No pictures will be taken during WB bracketing if there is
not enough memory on the card for the selected number of
frames.
A-B G-M
WB BKT
3f 4Step 3f 4Step
Back Set