Olympus E-1 - Manual (Page 7)

Battery check indication
When the camera is turned on or if the battery runs out while the camera is being
operated, the battery check indication changes on the monitor and control panel as
follows:
Getting Started
1 Battery check
2 Print reservation
Number of prints
3 Protect
4 Record mode
5 Date and time
6 File number
7 Exposure mode
8 Metering mode
9 ISO sensitivity
10 Color space/Saturation
11 Focal length
12 Shutter speed
13 Aperture value
14 Exposure compensation
15 Flash intensity control
16 White balance
17 White balance compensation
18 Contrast
19 Sharpness
Monitor indications (only for playback)
’03.01.01 00:00
SQ [ 1024x768 , 1/8 ]
x10
FILE:123–3456
1 3 2
4
5
6
P ESP
ISO 100
sRGB / CS3
45mm
1/200 F5.6 0.0 0.0
WB: AUTO – 2STEP
CONTRAST: –2
SHARPNESS: –2
SQ 7
8
13
14
15
17
9
10
11
12
16
18
19
Single-frame playback information
Shooting information
You can switch the monitor display using the INFO (information display) button and
dials.
7
Getting Started
En
Battery Control
Monitor Viewfinder indications
Remaining power
check panel level*
Lights Lights (green) — High
Number of storable
Low. Re-charge
Blinks Lights (red) sequential pictures
the battery at once.
blinks
Depleted. Replace the
No indication Turns off Turns off Turns off battery with a charged
battery.
* The digital camera’s power consumption varies greatly depending on usage and operating
conditions. Under some operating conditions, the camera may turn off without warning that
battery power is low. If this occurs, re-charge the battery.
1 E-1 Ba-EN P1 03.7.8 5:55 PM Page 7