Olympus E-1 - Manual (Page 34)

34
En
Playback
Protecting pictures
This function protects pictures from being accidentally erased.
1
Display the picture you want to protect.
2
Press the (protect) button.
● is displayed on the screen.
To cancel the protection:
Display the pictures that are protected and press
.
Single-frame erase
This function erases only the picture that is displayed on the monitor.
1
Display the picture you want to erase.
2
Press the button.
● The ERASE screen is displayed.
3 Press to select YES, then press the OK button.
Erasing selected frames
This function lets you erase selected pictures at one time. You can select and erase
several pictures from the index display screen.
1
Bring up the index display.
2
Press to select the pictures you want to erase, and the press the OK
button.
● The selected pictures will be shown with red frames.
● Press
OK again to cancel your selection.
3 After you have selected the frame to erase, press the (erase) button.
● The ERASE SELECTED screen is displayed.
4
Press to select YES, then press OK .
1 E-1 Ba-EN P1 03.7.8 5:56 PM Page 34