Olympus E-1 - Manual (Page 43)

43
En
Specifications
Ⅵ Exposure control
Metering system
: TTL full-aperture metering system
(1) Digital ESP metering
(2) Center weighted average metering
(3) Spot metering (approx. 2% for the viewfinder screen)
Metering range : (1) EV 1 - 20 (Digital ESP metering, Center weighted average metering)
(2) EV 3 - 17 (Spot metering)
(At normal temperature, 50 mm F2, ISO 100)
Exposure mode : (1) P: Program AE (Program shift can be performed)
(2) A: Aperture priority AE
(3) S: Shutter priority AE
(4) M: Manual
ISO sensitivity : 100 - 800 (High ISO values (1600 and 3200) are available)
Exposure compensation : Exposure can be adjusted in 1/3, 1/2 or 1 EV step within a range of ± 5 EV.
Ⅵ White balance
Product type
: CCD and white balance sensor
Mode setting : Auto, Preset WB (12 settings), One-touch WB
(4 settings can be registered)
Ⅵ Recording
Memory
: CF card (Compatible with Type I and II)
Microdrive compatible (Compatible with FAT 32)
Recording format : DCF, DPOF compatible/Exif 2.2 compatible, PRINT Image Matching II
compatible
Recording mode : RAW (12 bits), TIFF (RGB), JPEG
Ⅵ Playback
Playback mode
: Single-frame playback, Close-up playback, Index display,
Picture rotation
Information display : Information display, Histogram display, Highlight display
Ⅵ Drive
Drive mode
: Single-frame shooting, Sequential shooting, Self-timer,
Remote control
Sequential shooting : 3 frames/sec. (Max. no. of storable sequential pictures: 12 frames)
*Applied to all record modes.
Self-timer : Operation time: 12 sec., 2 sec.
Optical remote control : Operation time: 2 sec., 0 sec. (instantaneous shooting)
Ⅵ Flash
Synchronization
: Synchronized with the camera at 1/180 sec. or less
Flash control mode : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL
Flash attachment : Hot shoe, External flash connector (x attachment)
1 E-1 Ba-EN P1 03.7.8 5:56 PM Page 43