Olympus PT-037 - Manual (Page 24)

EN 24
En
Check the operation of the loaded camera.
After sealing the Case, check that the camera functions normally.
1
Push the POWER button on the Case and confirm that the camera
turns on/off.
2 Turn the mode dial knob on the rear of the Case and confirm that the
camera mode is switched properly.
• Check that the selected mode is displayed correctly on the LCD
monitor.
3 Press the shutter lever on the Case and confirm that the camera shutter
releases.
• Also operate other control buttons on the Case and confirm that the
camera functions properly.
Confirm the shooting scene and shooting mode.
When using the Case, the current camera shooting scene and shooting
mode can be confirmed on the camera’s LCD monitor.
CAUTION:
If the camera does not function properly, reinstall the digital camera
following the procedures of “Check the digital camera.” (P.19) of this manual.
Shooting scene/Shooting mode
PT037_EN.book Page 24 Monday, August 6, 2007 10:48 AM