W# custom, Menu functions (custom menus) – Olympus E-M1 User Manual

Page 94

94 EN

Menu functions (Custom menus)

Option

Description

Noise Filter

Choose the amount of noise reduction performed at high
ISO sensitivities.

—

ISO

Set ISO sensitivity.

ISO Step

Select the increments available for choosing ISO sensitivity.

—

ISO-Auto Set

Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for ISO.
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.

—

ISO-Auto

Choose the shooting modes in which [Auto] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all
modes except M. ISO sensitivity is fi xed at ISO200 in mode

M.
[All]: Auto ISO sensitivity selection is available in all modes.

—

Metering

Choose a metering mode according to the scene.

AEL Metering

Choose the metering method used for AE lock (P. 98).
[Auto]: Use the currently selected metering method.

—

BULB/TIME Timer Choose the maximum exposure for bulb and time

photography.

—

BULB/TIME
Monitor

Sets the monitor brightness when [BULB], or [TIME] is
used. Also sets the brightness of the external electronic
viewfi nder.

—

Live BULB

Choose the display interval during shooting. Some
restrictions apply. The frequency drops at high ISO
sensitivities. Choose [Off] to disable the display. Tap the
monitor or press the shutter button halfway to refresh the
display.

—

Live TIME

—

Anti-Shock z

Choose the delay between the shutter button being
pressed and the shutter being released. This diminishes
camera shake caused by vibrations. This feature is
useful in situations such as microscope photography and
astrophotography. It is also useful for sequential shooting
(P. 55) and self timer photography (P. 55).

—

# Custom

Option

Description

# X-Sync.

Choose the shutter speed used when the fl ash fi res.

106

# Slow Limit

Choose the slowest shutter speed available when a fl ash
is used.

106

w+F

When set to [On], it will be added to the exposure
compensation value and fl ash intensity control will be
performed.

49, 71

MENU

V Exp/p/ISO

MENU