Olympus E-M1 - Manual (Page 54)

54 EN
Basic operations
5
Zoom frame AF/zoom AF
You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
01:02:03 01:02:03
30 30
250 250 F5.6 0.0 0.0
R R Wi-Fi
L N
S-IS AUTO S-IS AUTO
ISO-A
200
FullHD
F
Shooting display
01:02:03 01:02:03
30 30
250 250 F5.6 0.0 0.0
R R Wi-Fi
L N
S-IS AUTO S-IS AUTO
ISO-A
200
FullHD
F
Zoom frame AF Zoom AF
U U
U U
U U
Q / U
(Press and hold)
1 Assign [U] to one of the buttons in advance using [Button Function] (P. 99).
• a can also be set as a multi-function button.
2 Press the U button to display the zoom frame.
• If the camera was focused using autofocus just before the button was pressed, the
zoom frame will be displayed at the current focus position.
• Use FGHI to position the zoom frame.
• Press the INFO button and use FG to choose the zoom ratio.
Comparison of AF and zoom frames
14Ч
10Ч
7Ч
5Ч
3 Press the U button again to zoom in on the zoom frame.
• Use FGHI to position the zoom frame.
• Rotate the dial to choose the zoom ratio.
4 Press the shutter button halfway to initiate autofocus.
• The camera will focus using the subject in the frame at the center of the screen. To
change the focus position, move it by touching the screen.
$ Notes
• You can also display and move the zoom frame using touch screen operations.
# Cautions
• Zoom is visible only in the monitor and has no effect on the resulting photographs.
• When you are using a Four Thirds system lens, the AF will not operate with during zoom
display.