Ae bracketing, P. 83 – Olympus EVOLT E-500 User Manual
Page 83
83
6
Expo
sure, im
age
and
colo
r
AE bracketing
The camera automatically shoots a number of pictures at different exposure
values for each frame. Even in conditions where correct exposure is difficult to
obtain (such as a backlit subject or a scene at dusk), you can pick the picture
you prefer from a selected number of frames with a variety of different
exposure settings (exposure and compensation values). The pictures are
taken in the following order: Picture with optimum exposure, picture adjusted
in - direction, and picture adjusted in + direction.
Compensation value: 0.3, 0.7 or 1.0
The exposure compensation values depend on the EV step interval setting that
can be changed in the menu. Exposure compensation value can be adjusted
within a range of ±1.0.
Number of frames : 3
1
Menu [
] [AE BKT]
2
Use the control dial
to set.
[OFF] / [3F 0.3EV] /[3F 0.7EV] / [3F 1.0EV]
3
Press the
i button.
4
Start shooting.
Single-frame shooting
Each time the shutter button is pressed
fully, a picture is taken at a different
exposure.
• The setting for the next shot is displayed in
the viewfinder.
Sequential shooting
Hold down the shutter button until the
selected number of frames are taken. The
camera shoots each frame at a different
exposure.
• Release the shutter button to stop auto
bracketing shooting. When it is stopped,
BKT is shown in blue on the control panel.
Example:
When BKT
is set to [3F
1.0EV]
-1.0EV
±0
+1.0EV
AE BKT
OFF
3F 0.3EV
3F 0.7EV
3F 1.0EV
CANCEL
GO
SELECT
MENU
MENU
Viewfinder
EV step