Olympus EVOLT E-500 - Manual (Page 151)

151
Direct printing (PictBridge)
9
Pr
inting
If an error code is displayed
If an error code is displayed during direct printing setting or printing, see the
following table.
For more details on solutions, refer to the printer's instruction manual.
If other codes are displayed, refer to “Error codes” (P. 168).
Monitor indication Possible cause Corrective action
NO CONNECTION
The camera is not
connected to the printer
correctly. Disconnect the camera
and connect it again
correctly.
NO PAPER
There is no paper in the
printer. Load some paper in the
printer.
NO INK
The printer has run out
of ink. Replace the ink cartridge
in the printer.
JAMMED
The paper is jammed. Remove the jammed
paper.
SETTINGS CHANGED
The printer's paper
cassette has been
removed or the printer
has been manipulated
while making settings
on the camera. Do not manipulate the
printer while making
settings on the camera.
PRINT ERROR
There is a problem with
the printer and/or
camera. Turn off camera and
printer. Check the printer
and remedy any problems
before turning the power
on again.
CANNOT PRINT
Pictures recorded on
other cameras may not
be printed on this
camera. Use a personal computer
to print.