Olympus EVOLT E-500 User Manual
Page 42
42
Advanced shooting modes
3
Selec
ting
th
e righ
t m
ode for sh
oo
ting
con
d
ition
s
3
Press the shutter button halfway.
• Focusing is performed and the AF
confirmation mark lights on the viewfinder.
• The shutter speed that has been set
automatically by the camera is displayed on the viewfinder.
4
Press the shutter button all the way.
TIPS
The shutter speed indication does not stop blinking after the aperture value is
changed.
J If the shutter speed indication is blinking when set to a high speed, set the
ISO sensitivity to a lower value or use a commercially-available ND filter (for
adjusting the amount of light).
g "ISO — Setting the desired sensitivity to
J If the shutter speed indication is blinking when set to a lower speed, set the
ISO sensitivity to a higher value.
g "ISO — Setting the desired sensitivity
To change the EV step interval:
J In the menu, set the EV step interval to 1/3EV, 1/2EV or 1EV.
To check the depth of field with the selected aperture value:
J Refer to "Preview function" (P. 47)
Halfway down
Underexposed when the
shutter speed indication is
blinking. Decrease the
aperture value (f-number).
Overexposed when the
shutter speed indication is
blinking. Increase the
aperture value (f-number).
Viewfinder
Shutter speed
Aperture value
Exposure mode
AF confirmation
mark
Viewfinder
Shutter speed
Aperture value
Exposure mode
AF confirmation
mark
All the way down