Olympus DS-3500 User Manual

Page 13

LCD/Sound Menu

Backlight:
By default, the display will remain lit
for about 10 seconds when a button
on the recorder is pressed.

1 Select [ Lighting Time ], [ Dim

Light Time

] or [ Brightness ].

2 Select the options.

When [Lighting Time] is selected:
[ 5seconds ] [ 10seconds ] [ 30seconds ]
[ 1minute ]:
Set the backlight duration.
When [Dim Light Time] is

selected:

[ 30seconds ] [ 1minute ] [ 2minutes ]
[ 5minutes ]
[ Always On ]:
Set the time after which the

backlight dims.

Adjust the start/stop actuation
level:

While the recorder is in recording
mode, press the

9 or 0 button

to adjust the actuation level.

• The VCVA level can be set to any of

15 different values.

• The higher the value is, the more

sensitive the recorder can react to
sounds. At the highest value, even
the faintest sound will activate
recording.

• The VCVA actuation level can be

adjusted according to the ambient
(background) noise.

C Start level (moves to the right/

left according to the set level)

• The start/stop actuation level also

varies depending on the selected
microphone sensitivity mode.

• To ensure successful recordings,

prior testing and adjustment of
the start/stop actuation level is
recommended.

Device Menu

Card Select:
By default, the recording media is set
to [ SD Card ] by the manufacturer.
• The recording media ([

] or [

])

will appear on the display.

Cue/Rev:
The playback sound of Cue and
Review operation and Cue and
Review speed can be set.

1 Select [ Sound ] or [ Speed ].

[ Sound ]:

Set the playback sound of Cue
and Review to On or Off.

[ Speed ]:

Set the Cue and Review speed.

2 Select the options.

When [Sound] is selected:
[ On ]:

Activate the playback sound of
Cue and Review.

[ Off ]:

Disables this function.

When [Speed] is selected:
You can adjust the Cue and

Review speed level from
[ Speed 1 ] to [ Speed 5 ].

• Cue and Review speed level

becomes faster as the numerical
value becomes larger.

Power Save:
By default, the recorder will enter
into Power Save mode if not used for
more than 10 minutes.
[ 5minutes ] [ 10minutes ] [ 30minutes ]
[ 1hour ]:
Set the length of time before the

recorder will enter into Power Save
mode.

[ Off ]: Disables this function.
• If any button is pressed, time count

will restart.

Time & Date:
Setting the time and date beforehand
enables easier file management.
For details, see “ Setting time and
date [Time & Date] ”.

USB Class:
You can set the USB class of this
recorder with a USB connection to
[ Composite ] or [ Storage Class ].
[ Composite ]:

In the 3 classes of Storage, USB
audio and human interface device,
USB connection is possible. While
connected via USB in [ Composite ],
the recorder can be used as the USB
speaker and the USB microphone in
addition to storage class.

[ Storage Class ]:

USB connection is possible in only
storage class.

Reset Settings:
To reset the menu settings to their
default values use [ Reset Settings ]
under [ Device Menu ], or use the
ODMS and DSS Player software.

Format:
Cards that have been used in non-
Olympus devices, or cards that are
not recognized by the recorder, must
be formatted before they can be used
with the recorder.
• Formatting the card will erase all

the stored data, including locked
files.

For details, see “ Formatting the card
[Format] ”.

When [Brightness] is selected:
[ 01 ] [ 02 ] [ 03 ]:
Sets the brightness of the

backlight when lit.

LED:
You can set it so the record indicator
light does not turn on.
[ On ]:

LED light will be set.

[ Off ]:

LED light will be canceled.

Beep:
When the Beep is set to [ On ], the
recorder will beep in case of error.
[ On ]:

Beep is enabled.

[ Off ]:

Beep is disabled.

Language (Lang):
You can set the language for the
recorder’s user interface.
[ Čeština ] [ Dansk ] [ Deutsch ] [ English ]
[ Español ] [ Français ] [ Nederlands ]
[ Polski ] [ Русский ] [ Svenska ]:
• The languages available may vary

depending on the country/region
where the product is purchased.