Alliance Laundry Systems SF250PV Tilt - Manual (Page 24)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
F232101 22
Operational Keypad
The computer’s control keypad includes sixteen keys.
Refer to Figure 7. Fourteen of these keys list functions
printed in black lettering on a silver background.
These functions are available to the operator and are
intended to control operation of the washer-extractor.
Refer to Table 2.
Operational Keypad
Key Description
Numbers 0 – 9 Press to select cycle number
Display Temp Press and hold. Display will show and update sump temperature in degrees Fahrenheit or Centigrade.
Advance Press to cause computer to skip to the next step in the cycle. The computer will not advance past drain
step. (The Advance key is enabled at the factory and can be disabled at the laundry site.)
Stop Press to immediately abort the cycle and initiate the Stop routine
Start Press to start selected cycle or to re-start a step following a “FILL” or “EMTY” alarm. Refer to Error
Recovery Routine in this section of the manual.
Manual Refer to Manual Mode Control Feature at the end of this section.
Table 2