Emergency stop button, Wet clean features, Wet clean capabilities – Alliance Laundry Systems SF250PV Tilt User Manual
Page 19
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
17
F232101
Emergency Stop Button
On 135-pound capacity models, a red emergency stop
button is located on the upper right-hand corner of the
control panel. On 250-pound capacity models, the
emergency stop button is on the left side of the washer-
extractor front. Push the button in to stop the washer-
extractor. Pull out to reset.
Wet Clean Features
The washer-extractor is equipped with the following
wet clean capable features: One-half wash speed
allows gentle mechanical action during wash. Eight
supply signals provide not only normal laundering
signals to dispense detergents, bleaches, softeners,
sours, etc., but also chemicals unique to wet clean
processing.
Wet Clean Capabilities
Differences in WE6 prompt (setup) options
The WE6FRWC software provides the usual setup
options:
●
Degrees F / C
●
One or Two drain
●
Advance / No Advance
●
Manual / No Manual
●
Balance setting
In addition, the software provides Wet Clean / No Wet
Clean. The Wet Clean / No Wet Clean option enables
or disables wet clean functions. The prompt (setup)
options are now as follows:
●
CEN / FAR
●
1DRAIN / 2DRAIN
●
ADV / NO ADV
●
MANUAL / NO MAN
●
WET CL / NO WCL
●
BAL SW, BAL 1, BAL 2, BAL 3