AEG Voxtel S110 combo - Manual (Page 8)

8
>Any large metal object, such as a refrigerator, mirror or filing cabinet, between the handset and the
base unit may block the radio signal.
>Other solid structures, like walls, may reduce the signal strength.
>Other electrical equipment may cause interference and/or affect the range.
tDo not place close to another telephone, a TV or audio equipment - it may cause interference.
tOut of Range warning. If you hear a warning tone during a call, and/or the sound in the earpiece
becomes faint or distorted, you may be going out of range of the base unit, so move nearer to the base
unit within 20 seconds, otherwise the call may be cut off.
7 TELEPHONE OPERATION
Using a cordless handset:
7.1 Make a call
7.1.1 Preparatory dialling
tEnter the phone number and press to connect to the line and dial the number.
>When entering the number, if you make a mistake, press to delete digits.
7.1.2 Direct dialling
tPress to connect to the line and then enter the phone number.
tPress again to turn on the speakerphone
7.1.3 Call from the phonebook
tPress
OK
to access the phonebook and press / to select the desired phonebook entry.
tPress to dial out the selected phonebook entry.
7.1.4 Call from the call list (only available with caller display)
tPress to access the call list and press / to select the desired call list entry.
tPress to dial out the selected call list entry.
7.1.5 Call from the redial list
tPress to access the redial list and press / to select the desired redial number.
tPress to dial out the selected redial number.
7.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after dialling and remains on the
screen for 5 seconds after the end of the call.
It is shown in hours, minutes and seconds format (HH:MM:SS).
7.1.7 Make a call from direct memory keys (M1-M3)
A direct memory key, M1, M2 or M3 must be programmed with a number before it can be used. Please see
section “11.3.11 Set the direct memory keys” for details.
tIn idle, press and hold M1 / M2 / M3 to dial the number pre-stored into the respective key.
OR
tPress , and then press and hold M1 / M2 / M3 to dial the number pre-stored into the respective key.
>If no number is stored, you will hear a double beeps tone.
7.2 Answer a call
If the handset is not on the charging cradle:
tWhen the phone rings, press to answer a call.
Note:
If “AUTO ANSWER” is set to “ON”, then lifting the handset off the base or charger will answer the call
automatically and no keys need to be pressed.