AEG Voxtel S110 combo - Manual (Page 17)

17
UK
Note:
tA key press will still disable the alarm even if the handset keypad is locked when the alarm rings.
tThe alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is
set to “OFF“, the alarm still sounds at “VOLUME 1“ level.
tDuring an external call or internal call, if an alarm is set and when the alarm time is reached, the and
“ALARM ON ” will still flash. An alarm tone will be emitted from the earpiece to alert the user the alarm
time is reached. Once the user presses any key or presses and holds to disable the alarm, the display
will revert to the call duration .
tDuring paging or ringing, the alarm will not sound when the alarm time is reached. However, if the
snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of
the snooze period.
11.2.1 Turn on/off the alarm
tPress and / to select “ALARM”.
tPress
OK
and / to show “ON” or “OFF”.
tPress
OK
to confirm your choice.
>If “ON” is selected, you will be prompted to set the alarm time.
11.2.2 Set the alarm time (if the alarm is set to be on)
tPress and / to select “ALARM”.
tPress
OK
and / to select “ON”.
tPress
OK
to confirm.
tEnter the alarm time in 24 hour format.
tPress
OK
to display “SNOOZE”.
tPress
OK
and / to show “ON” or “OFF”.
tPress
OK
to confirm your setting.
11.3 Handset settings
11.3.1 Set the ringer melody for internal calls
tPress and / to select “HS SET”.
tPress
OK
and / to select “RINGER”.
tPress
OK
and / to select “INT RING”.
tPress
OK
and / to select the ringtone you want to hear for internal calls.
>There are 10 ring tones, and each will play as you step through the list.
tPress
OK
to confirm.
11.3.2 Set the ringer melody for external calls
tPress and / to select “HS SET”.
tPress
OK
and / to select “RINGER”.
tPress
OK
and / to select “EXT RING”.
tPress
OK
and / to select the ringtone you want to hear for external calls.
>There are 10 ring tones, and each will play as you step through the list.
tPress
OK
to confirm.
11.3.3 Set the ringer volume
tPress and / to select “HS SET”.
tPress
OK
and / to select “RINGER”.
t Press
OK
and / to select “RING VOL”.
tPress
OK
and / to select the desired ringer volume (a total of 6 ringer volume levels including “OFF”).
>The respective ringer volume will be played during your selection. If “OFF” is selected, the ringer off
icon
p p p p p
will be displayed after confirming .
tPress
OK
to confirm.
11.3.4 Set alert tones
Three different alert tones are set on by default, but can be turned off, if desired.
tKey tone: a single beep is emitted when you press a key.