AEG Voxtel S110 combo - Manual (Page 18)

18
tLow battery tone: emitted while you are talking on the phone to alert you that you need to charge the
handset batteries.
tOut of range tone: emitted while you are talking on the phone to alert you to move closer to the base
unit, before the call is lost.
tPress and / to select “HS SET”.
tPress
OK
and / to select “TONE”.
tPress
OK
and / to select “KEY TONE” / “LOW BATT” / “OUTRANGE”.
tPress
OK
and / to turn these tones “ON” or “OFF”.
tPress
OK
to confirm.
11.3.5 Set the equalizer
The phone has three different frequency range filters (“NORMAL”, “BASS”, “TREBLE”) that you can set,
to adjust the sound in the earpiece to suit your preference.
tPress
and / to select “HS SET”.
tPress
OK
and / to select “EQLIZER”.
tPress
OK
and / to select “NORMAL” / “BASS” / “TREBLE”.
tPress
OK
to confirm the setting.
11.3.6 Select base
If you have registered the handset to more than one base, you can select any one of them to
use with your handset.
Note:
You can only use the handset with one base at any one time.
tPress and / to select “HS SET”.
tPress
OK
and / to select “SEL BASE”.
tPress
OK
and / to select the desired base.
>The currently selected base is indicated by a *.)
tPress
OK
to confirm.
>The handset may take a short while to search for the new base.
11.3.7 Set the handset language
tPress and / to select “HS SET”.
tPress
OK
and / to select “LANGUAGE”.
tPress
OK
and / to select the desired language.
tPress
OK
to confirm.
11.3.8 Rename the handset
The handset name, displayed in the standby mode (default HS), can be changed to any other name of up
to 6 letters.
tPress
and / to select “HS SET”.
tPress
OK
and / to select “HS NAME”.
tPress
OK
and enter the name, of up to 6 letters for your handset.
tPress
OK
to confirm.
11.3.9 Choose the Information to be displayed in idle
You can choose to display the time or handset name in your idle screen.
tPress
and / to select “HS SET”.
tPress
OK
and / to select “DISPLAY”.
tPress
OK
and / to select “HS NAME” or “TIME”.
tPress
OK
to confirm.
11.3.10 Set the auto answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting the cordless handset off
the charger without having to press any key.
tPress
and / to select “HS SET”.