AEG BP5304001B - Manual (Page 10)

SYMBOL FUNCTION DESCRIPTION
END Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
matically later.
Press again and again to switch between the clock functions.
To confirm settings of the clock functions use or wait 5 seconds for an automatic
confirmation.
Setting the DURATION or END
1. Press again and again until the display shows or .
or flashes in the display.
2. Press or to set minutes.
3. Press to confirm.
4. Press or to set the necessary hour.
5. Press to confirm.
A sound operates after the time ends for 2 minutes. or symbol and time setting
flash in the display. The oven stops.
6. Press any button or open the oven door to stop the sound.
If you press button during setting hours for DURATION
, the appliance goes to setting
of the END function.
When END function is activated the Timer/Residual heat indicator shows relation between
Time of day and END time set.
Setting the MINUTE MINDER
Use to set a countdown (maximum 23:59 minutes) This function has no effect on the
operation of the oven
Set the function when the appliance is off:
1. Press again and again until the display shows and " 00 " flash.
2. Press or to set the seconds.
3. Use the same procedure to set minutes and hours.
When you set hours, minutes replaced seconds on the display and hours replaced mi-
nutes. Symbol comes on the display.
4. MINUTE MINDER starts to operate automatically after 5 seconds.
After 90% of set cooking time an acoustic signal sounds.
5. When set time ends, an acoustic signal sounds for 2 minutes and " 00:00 " and flash
in the display.
You can set the MINUTE MINDER any time, even if the oven is off.
10 Clock Functions