Asus P5AD2-E Deluxe - Manual (Page 141)

A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e 5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[ Rebuild RAID Menu ]
Array No Array Mode Drive No Size(MB) Status
Array 0 Stripe 4 XXXXXX Functional
Array 1 Mirror 2 XXXX Functional
Array 2 ---- ---- ----- -----
Array 3 ---- ---- ----- -----
∗∗∗∗∗
: Capacity (GB)
♦ ♦ ♦ ♦ ♦
: Bootable Array
[
↑↑↑↑↑
] Up [
↓↓↓↓↓
] Down [Enter] Select [ESC] Exit
Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array
This option allows you to rebuild an existing RAID set. This option only
applies to RAID 1 (Mirrored) or RAID 0+1(Striped+Mirrored) sets.
To rebuild a RAID 1 or 0+1 set:
1. Press <4> from utility main menu. The following screen appears.
2. Use the up or down arrow keys to select a RAID array, then press
to rebuild. The following screen appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[ Source Drive ]
[ Target Drive ]
Channel ID Drive Name Size (MB)
Pri/D1 XXXXXXXXXX XXXXX
∗∗∗∗∗
: Capacity (GB)
[
↑↑↑↑↑
] Up [
↓↓↓↓↓
] Down [Enter] Select [ESC] Exit
[ Drive List]
Channel ID Drive Name Size (MB)
Sec/D1 XXXXXXXXXX XXXXX
Channel ID Drive Name Size (MB)
Pri/D1 XXXXXXXXXX XXXXX
Sec/D1 XXXXXXXXXX XXXXXX
3. Press the up/down arrow keys to select the drive you want to rebuild,
then press .
4. Follow succeeding screen instructions to continue.