beautypg.com

3 the inlet hose, Water-stop device, 4 water drainage – AEG L61270BI User Manual

Page 30

background image

13.3 The inlet hose

20

O

20

O

20

O

45

O

45

O

45

O

• Connect the hose to the appliance.

Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.

• Connect the water inlet hose to the

cold water tap with 3/4 thread.

CAUTION!
Make sure that there are no leaks
from the couplings.

Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.

Water-stop device

A

The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace the
hose.

13.4 Water drainage

There are different procedures to con-
nect the drain hose:

30 www.aeg.com