AEG L61270BI - Manual (Page 15)

Always obey the instructions that you find on the packaging of the de-
tergent products.
9.3 Setting the programme
(knob 1 )
Turn the programme selector dial to the
required programme.
The programme dial determines the
type of washing cycle (e.g. water level,
drum movement, number of rinses) and
the washing temperature according to
the type of laundry.
The pilot light of button 8 starts blinking.
The programme dial can be turned ei-
ther clockwise or anticlockwise.
= Reset programme / switching OFF
of the machine
If you turn the programme dial to
another programme when the
appliance is working, the yellow
pilot light of button 8 blinks 3
times. The display shows the
message Err to indicate a wrong
selection. The machine will not
perform the new set programme.
9.4 SETTING THE
TEMPERATURE (Button 2)
When setting a programme, the
appliance automatically propo-
ses the default temperature pro-
vided for that programme.
Press the button 2 repeatedly to in-
crease or decrease the temperature, if
you want your laundry to be washed at a
different temperature.
The cold wash is indicated with - - and
the symbol
.
For the maximum and the mini-
mum available wash water tem-
perature, see «Washing pro-
grammes».
9.5 SETTING THE SPIN SPEED
(button 3)
When setting a programme, the
appliance automatically propo-
ses the maximum spin speed
provided for that programme.
Press the button 3 repeatedly to change
the spin speed.
RINSE HOLD
If setting this option the water of the last
rinse is not emptied out to prevent the
fabrics from creasing. At the end of the
programme, and the symbol
ap-
pear on the display, the symbol
remains lit, the light of button 8 goes off
and the door is blocked to indicate that
the water must be emptied out.
NIGHT CYCLE
If setting this option, the appliance does
not drain the water of the last rinse and
the laundry is not wrinkled. All spinning
phases are suppressed so the washing
programme becomes noiseless and it
can be set in the night or during the
cheapest power rate hours. In some pro-
grammes the rinses are performed with
more water.
At the end of the programme, and the
symbol
appear on the display, the
symbol remains lit, the light of
button 8 goes off and the door is
blocked to indicate that the water must
be emptied out.
To empty out the water, please read
chapter «At the end of the pro-
gramme».
9.6 SETTING THE OPTIONS
(BUTTON 4)
Depending on the programme, different
functions can be combined.
Not all the options are compati-
ble among themselves. The sym-
bols of the incompatible options
disappear.
Anyway, if an option, which is not
compatible with the set washing
programme or any other option,
is selected, the Err message is
displayed for few seconds and
the yellow pilot of button 8 light
starts blinking.
Set the options after you have set the
programme but before pressing the but-
ton 8. Press the button 4: all the option
symbols appear on the display.
ENGLISH
15