AEG L61270BI - Manual (Page 17)

and the message Err is displayed for a
few seconds.
9.13 SETTING THE DELAY
START (button 9)
Before you start the programme, if you
wish to delay the start, press the button
9 repeatedly, to set the desired delay.
The symbol
appears on the display.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2 hours
and then by 1 hour up to a maximum of
20 hours.
The set delay time value appears on the
display for about 3 seconds, then the du-
ration of the programme appears again.
Set this option after you have set the
programme and before you press the
button 8.
You can modify or cancel the delay time
at any moment, before you press the
button 8.
The door will be locked throughout the
delay time. If you wish to add laundry in
the appliance during the delay time,
press the button 8 to set the machine to
pause. When the symbol
disap-
pears , the door can be opened. Add
the laundry, close the door and press the
button 8 again.
Setting the delayed start.
• Set the programme and the required
options.
• Set the delay start.
• Press button 8: the appliance starts its
hourly countdown. The programme
starts after the selected delay has ex-
pired.
Cancelling the delayed start
• Press the button 8 to set the appliance
to PAUSE;
• Press button 9 until the symbol ’ is
displayed;
• Press the button 8 again to start the
programme.
The set delay can be changed
only after you have set the wash-
ing programme again.
The Delay Start cannot be set with Drain
programme.
9.14 Altering an option or a
running programme
It is possible to change some options
before the programme carries it out. Be-
fore you make any change, you must
press the button 8 to pause the appli-
ance.
Changing a running programme is possi-
ble only by resetting it.
Turn the programme dial to
and then
to the new programme position.
Press the 8 button again to start the new
programme. The washing water in the
tub will not emptied out.
9.15 Interrupting a
programme
Press the button 8 to interrupt a pro-
gramme which is running, the corre-
sponding light starts blinking. Press the
button again to restart the programme.
9.16 Cancelling a programme
Turn the selector dial to to cancel a
programme which is running. Now you
can select a new programme.
9.17 Opening the door after
the programme has started
First press the button 8 to set the appli-
ance to pause by .
• If the symbol
disappears, the
door can be opened;
• If the symbol doesn’t go off, it
means that the appliance is already
heating or that the water level is too
high. In this case the door cannot be
opened;
• If you cannot open the door but you
need to open it, you have to switch
the appliance off by turning the selec-
tor dial to
/Off. After a few mi-
nutes the door can be opened (pay
attention to the water level and
temperature!);
After closing the door, it is necessary to
set the programme again and to press
the button 8.
ENGLISH
17