AEG L61270BI - Manual (Page 28)

6. Put one of the polystyrene packag-
ing elements on the floor behind
the appliance. Carefully put down
the appliance with the rear side on
it. Make sure not to damage the ho-
ses.
1
2
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical po-
sition.
9. Remove the power supply cable and
the drain hose from the hose hold-
ers.
10. Remove the three bolts. Use the key
supplied with the appliance.
11. Pull out the plastic spacers.
28 www.aeg.com