AEG L61270BI - Manual (Page 26)

Problem Possible cause/Solution
The appliance vibrates
or is noisy:
You have not removed the transit bolts and packing.
• Check the correct installation of the appliance.
The support feet have not been adjusted.
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or
the machine does not
spin:
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rota-
tion of the drum. This may happen several times be-
fore the unbalance disappears and normal spinning
can resume. If, after some minutes, the laundry is still
not evenly distributed in the drum, the machine will
not spin.
• The laundry load is perhaps to little, add more
items, redistribute the load manually and then se-
lect the spinning programme.
No water is visible in
the drum:
Appliances based on modern technology operate
very economically using very little water without af-
fecting performance.
The display shows the
alarm code
:
Anti-flooding system has activated.
• Pull out the plug from the power socket, close the
water tap and contact the Service Force Centre.
12.1 Service
• Refer to the information supplied with
this appliance for guarantee condition
and point of contact. The information
to give to the service is on the rating
plate.
We recommend that you write the
information here:
Model
(MOD.) ..................
Product number
(PNC) ..................
Serial number
(S.N.) ..................
26 www.aeg.com