Smart Technologies 800i5e-SMP - Manual (Page 38)

Setting Use Notes
Audio menu
Volume Adjusts the projector’s volume
amplification from -20 to 20. The default is 0.
Mute Mutes the projector’s audio output. The default is off.
If you mute the projector’s audio output
and then increase or decrease the
volume, the volume is restored
automatically. You can prevent this
from happening by disabling the
volume control.
Disable Volume
Control Disables the projector’s volume control
and the LCD volume control on the
ACP.
Closed Captioning Turns closed captioning on or off for
video sources that support closed
captioning.
Closed Captioning
Language Sets the closed captioning language to
CC1 or CC2. Typically, CC1 displays U.S. English
subtitles, while CC2 displays other
regional languages, such as French or
Spanish, depending on television
channel or media setup.
Projector Functions menu
3D On/Off Turns the DLP Link technology 3D
feature on or off. The default is off.
3D Format Displays the current 3D format
(Interleaved or Under-over). Interleaved breaks down the image
frame for each eye, alternately
displaying a line of visual information
from each frame.
Under-over concurrently displays
horizontally stretched image frames for
each eye, one above the other.
3D Invert
Left-Right Selects the 3D Invert setting (L-R or
R-L). L-R displays visual data for the left eye
first.
R-L displays visual data for the right
eye first.
Auto Signal Detect Enables or disables signal searching of
input connectors.
The default is off.
Select On to have the projector
continuously switch inputs until it finds
an active video source.
Select Off to maintain signal detection
in one input.
C H A P T E R 4
Using your interactive whiteboard system
26