Xerox 4112-4127 Enterprise Printing System-3364 - Manual (Page 8)

Safety and Notices Xerox 4112/4127
4 Xerox 4112/4127 Safety Guide
Do not perform any maintenance procedures unless you have been trained to do them by a
Xerox representative, or unless a procedure is specifically described in one of the manuals
included with your press.
Operational safety
Your Xerox equipment and supplies were designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with
established environmental standards.
Your attention to the following safety guidelines will help ensure the continued safe operation
of your product:
• Use the materials and supplies specifically designed for your product. The use of unsuitable
materials may result in poor performance of the machine and possibly a hazardous
situation.
• Follow all warnings and instructions that are marked on or supplied with the machine.
• Place the machine in a room that provides adequate space for ventilation and servicing.
• Place the machine on a level, solid surface (not on a thick pile carpet) that has adequate
strength to support the weight of the machine.
• Do not attempt to move the machine. A leveling device that was lowered when your
machine was installed may damage the carpet or floor.
• Do not set up the machine near a heat source.
• Do not set up the machine in direct sunlight.
• Do not set up the machine in line with the cold air flow from an air conditioning system.
• Do not place containers of coffee or other liquid on the machine.
• Do not block or cover the slots and openings on the machine.
• Do not attempt to override any electrical or mechanical interlock devices.
If you need any additional safety information concerning the machine or materials, contact
your Xerox representative.
Ozone safety
This product produces ozone during normal operation. The ozone is heavier than air, and the
quantity is dependent on print volume. Providing the correct environmental parameters, as
specified in the Xerox installation procedures, ensures that concentration levels meet safe limits.
If you need additional information about ozone, request the Xerox publication, OZONE by
calling 1-800-828-6571 in the USA. For a French language version, call 1-800-828-6571 in the
USA, then press 2.
WARNING
Be careful when working in areas identified with this warning symbol. These areas may be very
hot and should not be touched.