Xerox 4112-4127 Enterprise Printing System-3364 - Manual (Page 7)

Xerox 4112/4127 Safety and Notices
Xerox 4112/4127 Safety Guide 3
Europe (EU) and other markets
This product complies with IEC’s safety standard 60825-1 (Edition 1.2) issued August 2001.
The equipment complies with laser product performance standards set by governmental,
national, and international agencies as a Class 1 Laser Product. It does not emit hazardous
radiation as the beam is totally enclosed during all phases of customer operation and
maintenance.
This product contains laser warning labels. These labels are intended for use by the Xerox
Service Representative and are placed on or near panels or shields that require special tools for
removal. Do not remove any of the panels. There are no operator serviceable areas inside
these covers.
If you need additional safety information concerning the product or Xerox supplied materials,
you may call the following number:
+44 (0) 1707 353434
Safety standards
North America
This Xerox product is safety certified by IEC60950-1:2001 CSA International CAN/CSA C22.2
No. 60950-1-03 (First Edition).
Europe (EU) and other markets
This Xerox product is Safety Certified by NEMKO to publication IEC60950-1 (2001) First Edition.
Maintenance safety
• Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your product.
• Do not use aerosol cleaners. The use of supplies that are not approved may cause poor
performance of the press and could create a dangerous condition.
• Use the supplies and cleaning materials only as directed in this manual. Keep all materials
out of the reach of children.
• Do not remove the covers or guards that are fastened with screws. There are no parts
behind these covers that you can maintain or service.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.