Xerox 4112-4127 Enterprise Printing System-3364 - Manual (Page 10)

Notices Xerox 4112/4127
6 Xerox 4112/4127 Safety Guide
Regulatory information for RFID (US)
This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency
Identification device (RFID). This RFID complies with the requirements specified in FCC Part
15, Industry Canada RSS-210, European Council Directive 99/5/EC, and all applicable local laws
and regulations.
Operation of this device is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications to this equipment not specifically approved by the Xerox Corporation
may void the user's authority to operate this equipment.
Safety extra low voltage approval
This Xerox product is in compliance with various governmental agencies and national safety
regulations. All system ports meet the Safety Extra Low Voltage (SELV) circuits for connection to
customer-owned devices and networks. Additions of customer-owned or third-party accessories
that are attached to the press must meet or exceed the requirements previously listed. All
modules that require external connection must be installed per the installation procedure.
Certifications in Europe
December 12, 2006
Council Directive 2006/95/EC as amended. Approximation of the laws of the member states
related to low voltage equipment.
December 15, 2004
Council Directive 2004/108/EC as amended. Approximation of the laws of the member states
related to electromagnetic compatibility.
The CE mark applied to this product, symbolizes XEROX’s declaration of
conformity with the