Xerox DocuColor 242-252-260 con EFI Fiery EXP260-14691 - Manual (Page 3)

Page 3
T O OPEN THE . EXE FILE
1 Make sure that Fiery EX260 version 2.0 system software is installed.
2 Double-click the Zip file to extract the 1-V8PM1.exe file to a computer on the same network
as the Fiery EX260.
3 Double-click 1-V8PM1.exe to start the download.
4 Select 1-V8PM1.ps and click Next.
5 Click Accept for the license agreement.
T O INSTALL THE F REE F LOW ENABLEMENT FILE WITH THE F IERY P ATCH D OWNLOADER
1 Double-click the 1-V8PM1.ps file.
The Fiery Patch Downloader application launches.
2 Click Next.
The License Agreement window displays.
3 Click Accept.
The Logon dialog box displays.
4 Type “admin” and enter the administrator password.
For information about the default administrator password, see Configuration and Setup.
5 Enter either the Fiery EX260 IP address or the Fiery EX260 server name for the Hostname.
6 Click Connect.
The Server Information window displays.
7 Click Download.
The file 1-V8PM1.ps is extracted and downloaded.
8 Click Next.
9 Select Restart Fiery Service.
Allow the Fiery EX260 to restart without interruption.
10 When the Fiery EX260 displays Idle, print a Configuration page, and verify that the Update
Information section includes the file name: 1-V8PM1.ps.