Xerox Stampante digitale a colori Xerox 700i-700 con Integrated Fiery Color Server-15921 - Manual (Page 2)

Page 2
Electrical Supply
This equipment must be operated from the type of electrical supply indicated on the product
data label. If you are not sure that your electrical supply meets the product requirements,
consult your local power company for advice.
WARNING: To avoid risk of electrical shock, this equipment must be connected to a
grounded electrical outlet. The product is supplied with a plug that has a grounding prong,
which only fits into a grounded electrical outlet. This is a safety feature. If you are unable to
insert the plug into the electrical outlet, contact your electrician to replace the outlet.
Additional Electrical Safety Information
• Use only the power cord supplied with the equipment.
• Do not use an extension cord. Plug the power cord directly into a grounded electrical
outlet.
• Do not use this equipment on a circuit with insufficient capacity. This equipment must be
used on a branch circuit that has larger capacity then the rated ampere and voltage listed
on the data plate.
• Do not use equipment with improper grounding. Improper connection of the equipment
grounding conductor can result in an electrical shock.
• Do not place equipment where someone could trip over the power cord.
• Do not obstruct the ventilation openings.
• Do not insert or push objects of any kind into slots or openings on the equipment.
• If any of the following conditions occur, switch off the power by disconnecting the power
cord, and call an authorized local service representative:
- The equipment emits unusual noise or odors.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other ground fault circuit interrupter (GFCI) has
been tripped.
- Liquid has been spilled inside the equipment.
- The equipment has been exposed to water.
Disconnect Device
The power cord is the disconnect device for this equipment. It is attached to the back of the
equipment as a plug-in device. To remove all electrical power from the equipment, power off
the equipment as instructed in the product documentation, and then disconnect the power
cord from the electrical outlet.
Maintenance Information
Do not attempt any maintenance procedures that are not specifically described in the
customer documentation supplied with the product.