Xerox DocuColor 242-252-260 con built-in Fiery controller-16183 - Manual (Page 2)

Page 2 of 2
Copyright 2010© Electronics for Imaging, INC. Customer Support Release note template v1.0
4 This patch is exclusive, it must be installed by itself, and the server must be
rebooted or restarted once. After that, other patches can be applied to the server.
Patch installation instruction
1 Make sure that the Fiery is Idle.
2 Import the patch file 1-1FLFQA.ps using Command Workstation to the Direct
queue.
3 You must wait until the file finishes processing and Command WorkStation or
LCD show Idle. This ensures the patch file is completely processed. User should
wait one minute for complete installation of patch.
4 From Command WorkStation, choose Server, Reboot Server, or from the Fiery
LCD, select Shut down, Reboot System.
5 Wait until the Fiery comes to Idle and print the configuration page.
6 Verify that the Update Info section contains the patch number 1-1FLFQA.