beautypg.com

General information, Accxes software version 9.0, Helpful hints – Xerox Stampante Xerox 8830 con AccXES Controller serial number N5T-16835 User Manual

Page 2: Xes feature key instructions

background image

XES FEATURE KEY INSTRUCTIONS

701P39462 12/02

Page 2

General Information

AccXES Software Version 9.0

With the introduction of AccXES System software version 9.0 the following changes have been introduced:

Feature Key support for two new printers, the Synergix Print System 510dp and the Synergix Print System

721p.

New optional Feature Keys, see Table 1. The Drawer Enablement and Speed Enhancements 7D and

10D/Minute features are unique to the Synergix Print System 510dp Printer.

Helpful Hints

When downloading a Feature Key it may be helpful to open two browsers, one for the WebPMT to your AccXES
System and one for the XES Coupon Exchange web site. With the two browsers open you may move between the two
sites as required until the Feature Key download is complete. Once the download is complete you can maximize the
WebPMT and upload the Feature Key files to the Controller.

When downloading multiple Feature Keys, download all the keys before rebooting the AccXES System. This allows
you to download all the keys using the same KIK number. If you reboot, a new KIK number will be created and you will
have to obtain the new KIK number. Then use the procedure in the section entitled “Get a Single Replacement Key
(AccXES Software Versions 8.0 or Greater)” to download the additional keys.

This manual is related to the following products: