Xerox Stampante Xerox 8830 con AccXES Controller serial number N5T-16835 - Manual (Page 15)

XES FEATURE KEY INSTRUCTIONS
701P39462 12/02 Page 15
5. A “File Download” dialog box will appear, click “Save”. A “Save As” window
will open. Choose the location (Save In:) to save the file, and change the file
name if you desire. Click “Save” to save the file to your hard drive location or to
the diskette that came in this kit. Close the “Download Complete” window.
Multiple features can be downloaded using the same KIK. Repeat Steps 1 through
5 for each Feature to be removed before continuing to Step 6. A new KIK number
is created each time the AccXES System is rebooted. If you reboot, the new KIK
will have to be used in Step 3.
Note: You may want to rename the file to a meaningful name, but do not change
the file extension (.plt, .xky). Changing the file name will not affect the system’s
ability to read the file.
6. Upload the Uninstall Feature key file to the Controller using the Web PMT.
•
Open the WebPMT on your workstation
•
Navigate to PRINTER DEFAULTS > UTILITIES > Upload File.
•
Browse to where you saved the Feature Key file in Step 5 and click on the
Upload button to upload the file.
Note: The AccXES Client Tools, Document Submit Tool can also be used
(Reference the AccXES Client Tools User Guide). Send the key file(s) the same as
you would send a print job. The Controller will recognize the file extension and load
the key(s).
7. After waiting 60 seconds, reboot your entire system to disable the feature key.
Wait for the system to complete the reboot and automatically print out the
FEATURE RECEIPT page.
8. IMPORTANT: Locate and write down the Key Uninstall Verification (KUV) on
the Feature Receipt for the feature that was uninstalled.
Note: If required, reference the XES Synergix 8825/8830/8850/8855/510dp/721p
Digital Solutions User Guide, Powering Off the Digital Solution or Colorgrafx X2
User Guide, for reboot instructions.
9. Click the “Proceed to re-enable your coupon” button”
10. Enter the Key Uninstall Verification (KUV) number from the Printer
Configuration Test Print and click the “Continue” button.
11. This will re-enable the Feature Coupon to be used again on another AccXES
System. (Refer to the next page of this document to move the Feature to
another AccXES System.)