Xerox Stampante Xerox 8830 con AccXES Controller serial number N5T-16835 - Manual (Page 11)

XES FEATURE KEY INSTRUCTIONS
701P39462 12/02 Page 11
Get a Single Replacement Key (AccXES Software Versions Prior to
Version 8.0)
If you lose your feature key and need a replacement perform the following
steps:
Note: The steps below assume that your IOT HW (Hardware) Address, the
Scanner HW Address or Advanced Network HW Address has NOT changed (as
shown on the Printer Configuration Test Print or in the System Description
Applications.
With Internet Access…
1. Log on to the WebPMT and make a print of the Printer Configuration Test
Print, “Minimal” (Figure 3) or access the Printer Defaults screen on the
WebPMT (Figure 4) and verify that the:
•
Firmware version is prior to 8.0.
2. Using your Internet browser, access
http://www.xes.com/keys/httpHome/keys.html .
3. Select a language (English, French, German, Italian, Spanish, or
Portuguese).
4. Click on “Get a single replacement Key (AccXES versions prior to v8.0 or
XEScan version 1.1) and click “Continue.”
5. Enter the Coupon ID (obtained from the certificate or disk label in this kit) then
click “Continue”.
6. A “File Download” dialog box will appear, click Save. A “Save As” window will
open. Choose the location (Save In:) to save the file, and change the file
name if you desire. Click Save to save the file to your hard drive location or to
the diskette that came in this kit. Close the “Download Complete” window.
Note: You may want to rename the file to a meaningful name, but do not change
the file extension (.plt, .xky). Changing the file name will not affect the system’s
ability to read the file.
7. Repeat steps 12 - 16 (see pages 5-6) to complete this procedure.
Without Internet Access….
1. In the United States only, call Customer First at 1 877-XES-DNCS. If you are
outside the United States, please contact your support representative for
feature key instructions.
2. Repeat steps 12 - 17 (see pages 5-6) to complete this procedure.