11 bulk copy of settings, Copy settings from one device to another device, Bulk copy of settings -63 – Konica Minolta BIZHUB C30P User Manual
Page 72
PageScope Data Administrator
3
PageScope Data Administrator
3-63
3.11
Bulk Copy of Settings
Bulk copy authentication settings and address settings from one device to
multiple devices. Set by following the directions on the bulk copy wizard
screen.
2
Note
These functions may not be available depending on the device or
firmware version.
Copy Settings from One Device to Another Device
1
From the
Processing
menu, select
Copy
.
2
Select the functions to copy, and click
Next
.
–
Authentication: Select this when copying authentication settings.
This clears the user counter and group counter of the target device.
–
Address: Select this when copying address settings. The program
can be copied if the model and version are the same. Additionally,
if option configuration and destinations on the copy source and
copy target devices differ, then this will be registered with import
settings and communication settings turned OFF.
–
Reference Allowed Group: Select this when copying a group that
can be referenced for the copy source device. The reference group
for the copy target will be cleared.