Konica Minolta BIZHUB C30P User Manual
Page 44
PageScope Data Administrator
3
PageScope Data Administrator
3-35
–
Directory name: Input a name for the current details.
–
LDAP server address: Input the IP address or DNS name of the di-
rectory server. If using SSL, input the DNS name.
–
Search base: Input the search base. (Up to 512 characters)
(E.g.)
ou=sales division, dc=ABCDEFG, dc=com
Consult with the LDAP administrator about search bases to input.
–
Port number: Specify the port number to be used when accessing
LDAP servers.
–
SSL: Select when using SSL for LDAP communications.
It is recommended that you use SSL for secure transmission. Not
using SSL means that LDAP data will be transmitted over the net-
work in unsafe ASCII format.
–
Search maximum number: Specify the maximum number of items
to show when searching.
–
Timeout settings: Specify the transmission timeout for the LDAP
server. (1-120 sec)
–
Authentication (Anonymous, Simple, NTLM): Select the BIND type
for the LDAP server. Select NTLM when connecting to an Active Di-
rectory.
–
Domain name: Input the domain name.
Input
Domain Name
when connecting to an Active Directory.
–
User name: This field can be entered when authentication is not set
to
Anonymous
.
–
Password: This field can be entered when authentication is not set
to
Anonymous
.
–
Password (Confirmation): Re-input password for confirmation.
4
Set LDAP server access settings, and click
OK
.
The LDAP server access settings are added.