Konica Minolta BIZHUB C30P - Manual (Page 20)

PageScope Data Administrator 3
PageScope Data Administrator 3-11
2
Click Search and Register .
A Start device searching? message will be displayed.
– If a device search range has not been configured, then the Start
device searching? message will not be displayed. Instead, the
Registration by search screen will be displayed. Click Search
settings on the Registration by search screen, and add a search
range. For details, please refer to “Setting a Search Range” on
page 3-24.
3
Click Yes .
The device search starts, and devices that are found are displayed on
the list on the
Registration by search screen.
– Re-search: Search for devices within a specified search range.
– Search settings: Set the search range for devices.
– Select: Set the device to register. Select devices to register from
the list, and click
Select .
– Unselect: Cancel the selection of devices that have been selected
for registration. Select devices to remove from the list, and click
Unselect .
– Time-out period: Select the search timeout period.
4
Set the devices to register by clicking Select , and click OK .
The devices are registered.
2
Note
Up to a maximum of 100 device search ranges can be set.