Konica Minolta bizhub C200 - Manual (Page 73)

x-72 C200
*1
Parts marked in this way are not shown in the illustration.
*2
Parts marked in this way are internal options and therefore are not shown in the illustration.
2
Note
For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations].
11 Desk DK-504 Allows this machine to be set up on the floor.
Referred to as the desk throughout the manual.
12 Job separator JS-505 When installed onto the output tray, it can be used for separating printed pag-
es.
Referred to as the "separator" throughout the manual.
13 Assist handle AH-101 *1 Used to close the original cover or the ADF.
14 Fax kit FK-507 *2 Allows this machine to be used for faxing.
15 Fax multi line ML-504
*2
Allows expansion of the telephone lines for faxing.
16 Stamp unit SP-503
*2
Applies a stamp to documents that have been scanned.
17 Spare TX marker stamp MS-
501
*2
Used to replace the stamp in the stamp unit.
18 Expanded memory unit EM-
310
*2
Allows the memory to be expanded by 512 MB.
This is necessary for using the printer functions for double-sided printing, se-
cure printing, sorting printed pages and direct printing from a PDF file, for
scanning documents with the TWAIN driver without compressing the data, and
for shifting printed pages when the separator is installed.
No. Part name Description