Konica Minolta bizhub C200 - Manual (Page 171)

6 Troubleshooting
6-2 C200
Tr
ou
blesho
ot
ing
Ch
ap
te
r 6
6 Troubleshooting
6.1 Troubleshooting
This section describes common troubleshooting procedures in a question and answer format. If the problem
is not corrected, even after performing the described procedure, contact your service representative.
Why can’t the machine be turned on?
This machine has two switches.
Answer
Check for the following.
- Check that the machine’s power plug is firmly inserted into the electrical outlet. In addition, check that
the circuit breaker has not been tripped.
- Check that the machine has been turned by using both the sub power switch and the main power
switch.
2
Reminder
If the machine is not turned on after the indicated items have been checked, contact your service
representative.
Why does no screen appear in the touch panel?
If no operation is performed for a specified length of time, the touch panel goes off and the machine
automatically enters a mode where it conserves energy.