Konica Minolta bizhub C200 - Manual (Page 60)

C200 x-59
Loading paper into the bypass tray
Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not
loaded into a paper tray. The bypass tray is an option.
Follow the procedure described below to load paper into the bypass tray.
1
Open the bypass tray.
– When loading large-sized paper, pull out the tray extension.
2
Load the paper into the tray.
– Load paper so that the side to be printed on faces downward.
– Do not load so many pages that the top of the stack is higher than the , mark.
– Up to 100 sheets plain paper can be loaded.
– Slide the lateral guides to fit the size of paper to be loaded.
3
From the touch panel, select the paper type.