Konica Minolta bizhub C200 - Manual (Page 61)

x-60 C200
– Press [ ↑] and [↓] until the desired paper type appears.
– If label sheets are loaded, select "Thick 1".
– If non-standard-size paper is loaded, specify the Paper Size setting.
– For details on specifying the paper size and paper type settings, refer to chapter 6, "Copy
paper/originals", of the User’s Guide [Copy Operations].
– Printing on OHP transparencies is possible only in black.
!
Detail
Paper of the following types and amounts can be loaded into the bypass tray.
Plain paper (60 g/m
2
to 90 g/m
2
(16 lb to 24 lb)): Up to 100 sheets
Thick paper 1 (91 g/m 2 to 150 g/m 2 (24-1/4 lb to 40 lb)): Up to 20 sheets
Thick paper 2 (151 g/m
2
to 209 g/m
2
(40-1/4 lb to 55-1/2 lb)): Up to 20 sheets
Thick paper 3 (210 g/m
2
to 256 g/m
2
(55-3/4 lb to 68 lb)): Up to 20 sheets
OHP transparencies: Up to 20 sheets
Envelopes: Up to 10
Label sheets: Up to 20 sheets
Paper of the following sizes can be specified for the bypass tray.
Standard-sized paper: A3 w to B6 w, A6 w, 12 -1/4 × 18 w
*1
, 12 × 18 w
*1
to 5-1/2 × 8-1/2 w/ v,
4 × 6 w, 8 × 13 w* 2 , 16K w/ v, 8K w
Non-standard-sized paper: Width: 90.0 mm to 311.1 mm (3-9/16 inches to 12-1/4 inches); Length:
139.7 mm to 457.2 mm (5-1/2 inches to 18 inches)
*1
This is one size larger than A3. 12-1/4 × 18 is equivalent to 311.1 mm × 457.2 mm, and 12 × 18 is
equivalent to 304.8 mm × 457.2 mm
* 2 There are five Foolscap sizes: 220 × 330 mm w, 8-1/2 × 13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w and
8 × 13 w. Any one of these sizes can be selected. For details, contact your service representative.
2
Note
For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations].