beautypg.com

For new zealand, Warning, Caution – Konica Minolta bizhub C200 User Manual

Page 41

background image

x-40

C200

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information. If you home has specially wired alarm
equipment connected to the telephone line, ensure the installation of FK-507 and ML-504 does not disable
you alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone
company or a qualified installer.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including FAX machines, to send any message unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and
time it is sent and an identification of the business or other entity, or other individual sending the message
and the telephone number of the sending machine or such business, other entity, or individual. (The
telephone number provided may not be a 900 number or any other number for which charges exceed local
or long-distance transmission charges.)

In order to program this information into your FAX machine, you should complete the following steps: See
chapter 9.6, "Fax Settings", of the User’s Guide [Network Scan/Fax/Network Fax Operations].

For New Zealand

This device is equipped with pulse dialing while the Telecom standard is DTMF tone dialing. There is no
guarantee that Telecom lines will always continue to support pulse dialing.

Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise
to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user
should not contact the Telecom Fault Service.

This equipment may not provide for the effective hand-over of a call to another device connected to the same
line.

This equipment does not fully meet Telecom’s impedance requirements. Performance limitations may occur
when used in conjunction with some parts of the network. Telecom will accept no responsibility should
difficulties arise in such circumstances.

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom’s network services.

The automatic calling functions of this equipment must not be used to cause a nuisance to other customers.

Telepermitted equipment only may be connected to the auxiliary telephone port. The auxiliary port is not
specifically designed for 3-wire connected equipment. 3-wire might not respond to incoming ringing when
connected to this port.

WARNING/CAUTION Explained

WARNING

The exclamation point within an equilateral triangle followed by the word "Warning" is intended to alert the user to the
possibility that a disregard for the warning may result in fatal hazards or critical injuries. Be sure to focus your attention
on the Warning headings when reading this Quick Guide.

CAUTION

The exclamation point within an equilateral triangle followed by the word "Caution" is intended to alert the user to the
possibility that a disregard for the caution may result in minor injuries or in physical damage. Be sure to focus your
attention on the Caution headings when reading this Quick Guide.