Konica Minolta PageScope Net Care - Manual (Page 76)

6 Configuring PageScope Net Care Settings
65
• SMTP Server Address :
Type in the SMTP server host name or IP
address.
• SMTP Port Number :
Type in the SMTP server port number. The
default port number is 25.
• Use POP before SMTP :
Select this check box when the POP account
and password must be verified before an
SMTP transmission.
The POP settings are required when using this
function.
• POP3 Server Address :
Type in the POP3 server host name or IP
address.
• POP3 Port Number :
Type in the POP3 server port number. The
default port number is 110.
• E-mail Address (From) :
Type in the PageScope Net Care server mail
address.
• POP Account : Type in the PageScope Net Care server POP
account name.
• POP Password : Type in the PageScope Net Care server POP
account password.
• POP Interval (min.) :
Type in the POP server mail check interval, in
minutes. The default interval is 10 minutes.
2. After everything is the way you want, click the Apply button. To
cancel the operation, click the Cancel button instead of Apply .