Konica Minolta PageScope Net Care User Manual

Page 32

3 Using PageScope Net Care Client

The

Discovery Network / Range

list shows the local network

associated with the PageScope Net Care server. Whenever the
PageScope Net Care server starts up, it automatically adds the
local network associated with the server to the discovery range list.
If network discovery fails for some reason or if you want to add
other networks, click the

Add

button.

Important!

Enter a network address and subnet mask.
To specify a range of addresses, type the applicable IP addresses
into

Discovery From

and

Discovery To

To remove a specific network range from the searched area, select
the network in the

Discovery Network/Range

list, and then click

the

Remove

button. When the confirmation message appears,

click the

button.

If you also want discovery to find other maker’s RFC-1759
Printer-MIB compatible devices, select the check box next to the

Enable Generic Device Discovery

option in the

Device

Discovery

section. Then click the

Apply

button.

• The local network may not be discovered when PageScope

Net Care is started up while an SNMP agent is running on the
server where PageScope Net Care is installed. If this happens,
terminate the SNMP agent or add the local network manually
to the discovery range.