Konica Minolta PageScope Net Care - Manual (Page 64)

6 Configuring PageScope Net Care Settings
53
To link devices
1. After making sure that Link Devices is selected in the box at the
top of the Device Link Setting screen, select the check boxes in
the Link column next to the devices you want to link.
2. After everything is the way you want, click the Apply button. To
cancel your settings, click the Cancel button instead of Apply .
To unlink devices
1. Click the down arrow of the box at the top of the Device Link
Setting Screen and select Unlink Devices on the list that appears.
If you are using the HTML mode, select Unlink Devices from the
list and then click the Go button.
2. On the device list, select the check boxes in the Unlink column
next to the devices you want to unlink.
3. After everything is the way you want, click the Apply button. To
cancel your settings, click the Cancel button instead of Apply .