Konica Minolta bizhub C31P - Manual (Page 82)

Specifying Print Settings (Mac OS X 10.5) 64
Layout
The Layout section is used to specify the page layout when printing and the
setting for double-sided printing.
„ Pages per Sheet
Specifies the number of pages to be printed on one sheet of paper. For
example, if 2 is selected, two pages are printed on one sheet of paper.
„ Layout Direction
If you are printing more than one page per sheet, this specifies the direc-
tion and order the pages should be arranged on each sheet of paper.
„ Border
This prints a border around the image for each of the pages printed on
one sheet of paper when more than one page is printed on one sheet of
paper.
„ Two-Sided
Select the desired setting for double-sided printing when the optional
duplexing unit is installed.
Off: Double-sided printing is not performed.
Long-edged binding: Double-sided printing is performed with the binding
along the long edge of the paper.
Short-edged binding: Double-sided printing is performed with the bind-
ing along the short edge of the paper.
"
To print on both sides of the paper, Duplex Unit must be selected
under Installable Options (p. 34).
The Long-edged biding check box or Short-edged biding check
box can be selected even when the Duplex Unit is not installed. How-
ever, in this case, the print job will be cancelled.