Konica Minolta bizhub C31P - Manual (Page 239)

Configuring the Printer 221
Device Information
Summary (shown previous)
The System - Device Information - Summary window provides the follow-
ing information.
Item Description
Printer name/status Shows the name assigned to your printer, and dis-
plays the current status of the printer—just as it’s
displayed on the printer’s control panel message
window.
"
The status display allows you to remotely
identify possible printer problems, such as out
of paper and out of toner.
Device Status
(Product image) Identifies the type of printer that you are browsing.
The printer is pictured in the illustration with all
installed options.
Memory Displays the amount of memory installed in the
printer.
HDD If an optional hard disk kit is installed in the printer,
displays the size of the hard disk kit.
If no optional hard disk kit is installed in the printer,
displays “Not Installed”.
Memory Card If an optional CompactFlash card is installed in the
printer, displays the size of the CompactFlash card.
If no optional CompactFlash card is installed in the
printer, displays “Not Installed”.
Duplex Identifies whether the optional duplex unit (Duplex
Option) is “Installed” or “Not Installed”.
Paper Source Identifies the paper feed units (Tray1, Tray2, Tray3
or Tray4) installed on the printer.
"
Tray3 and Tray4 appear only if the optional
lower feeder units are installed.
Output Tray Identifies the output trays (Main Tray, Sub Tray)
installed on the printer.
"
Sub Tray appears only if the optional staple
finisher is installed.